Cylindrical Roller Bearings
Cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by ground ribs on either the inner or outer ring. The cylindrical shape allows the inner ring to have axial movement relative to the outer ring.Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life.
Cylindrical Roller. All cylindrical roller bearing configurations (except RAA) provide precision control of the rollers for operation over a wide range of speeds with precision-ground, double-ribbed guide flanges on one ring. These roller bearings are found in turbine engine mainshaft, transmission and gearbox applications with high radial loads.

- FAG NJ2218-E-TVP2-C3 Cylindrical Roller Bearings
- 45 mm
- 4800 r/min

- FAG NU2219-E-M1-C3 Cylindrical Roller Bearings
- 6.3750 in
- Non-Expansion Bearin

- FAG NJ219-E-TVP2-C3 Cylindrical Roller Bearings
- Lubrication Fitting
- PBT Thermoplastic

- FAG NJ224-E-M1-C3 Cylindrical Roller Bearings
- 9.3100 to 9.6900 in
- 2.6875 in

- FAG NU306-E-TVP2-C5 Cylindrical Roller Bearings
- Four-Bolt Piloted
- 7.0200 in

- FAG NJ232-E-M1-C3 Cylindrical Roller Bearings
- One
- Not Rated

- FAG NUP211-E-TVP2-C3 Cylindrical Roller Bearings
- 120 kN
- 27 mm

- FAG NU1028-M1-C4 Cylindrical Roller Bearings
- 6800 RPM
- 3.0000 in

- FAG N306-E-TVP2-C3 Cylindrical Roller Bearings
- .8750 in
- MPD

- 100 mm x 150 mm x 24 mm FAG NU1020-M1 Cylindrical Roller Bearings
- ASTM B505, ASTM B271
- None

- 25 mm x 52 mm x 18 mm FAG NJ2205-E-TVP2 Cylindrical Roller Bearings
- Stainless Steel
- 13000 rpm